Rail lifting platform Works and Safety Analysis

Rail lifting platform is a non-scissors hydraulic lifting equipment. Transport goods for two three industrial plants, restaurants, restaurants between floors. Minimum height of 150-300mm, preferably adapted not excavation pit workplace. And without the upper part of hanging points, diversification of forms (single column, double-column, four-poster). Chain guide lift platform running smoothly, easy to operate, reliable, convenient and economical freight transport.

Rail lifting platform works:

Because it is hydraulically powered, so it's carrying capacity, and can achieve hierarchical control between floors, the use of bilateral or sunk cylinder cylinders, when the lifting gear pump is rotated by a motor driven pump oil into the cylinder, the cylinder of the hydraulic oil up work under pressure, driven by increased upward chain. Chains were fixed laden table so laden table rise; when its own weight fall off the table, by the solenoid valve fuel tank hydraulic oil back into the tank, so that the steady decline in the table.

Rail lifting platform due to its low installation environmental requirements, does not require digging the foundation, under the conditions of a small space can also be installed above the hoistway and without machine room, easy maintenance, stable and space-saving. Compared Lifts etc. It surpasses a lower cost, has become one important reason why many customers like it. Rail lift at the same time with the safety device of the conventional traction elevator, also features:

Relief valve: When the pressure is too high to prevent upward movement of the system, the emergency manual valve: When the power fails, can the car down to the nearest emergency floor open position;

Hand pumps: chain guide lift when the system fails, manually steerable high-pressure oil pump shot the car up to the nearest floor position;

Hose rupture valve: When the hydraulic system piping rupture car stall down automatically cut off the oil stopped declining;

Oil fuel tank protection: When the oil temperature in the tank exceeds the standard set value, oil protection devices occurrence signal, suspend use of the elevator when the elevator started before the oil decline.

Rail lifting platform failure rate:

As a result of advanced hydraulic system, and have good control, elevator fault rate is approaching a minimum. Less power consumption: hydraulic elevator down, the pressure generated by the weight of the drive, a significant energy saving.

Just need to dig a pit more than a dozen centimeters, ensure that the goods out of the convenient, easy to install and use the occasion equipment.

Hydraulic cylinders, special heavy chain, wire rope, and more from the protection, equipment operation and to ensure safe use.

Without pit can directly use the ramp process, greatly facilitate the installation of equipment and the use of space applications.